Family-owned · Moody, Texas · Raw land to finished building Talk to the crew: (254) 931-6044
Three-bay tan metal garage with brown roll-up doors built by Quinn Construction on a Central Texas property
Metal building construction · Moody and Central Texas

Clear-span metal building construction, sized around your equipment

Hay getting rained on? Tractor parked under a live oak? We put up steel shops and barns sized around what goes inside them, from the pad to the last roll-up door.

The short answer

The short answer

Quinn Construction handles metal building construction for shops, workshops and equipment and hay barns across Central Texas. We size the frame around your tallest equipment and widest door, build the pad and set the anchor bolts to the manufacturer's plan, then stand and sheet the steel. For barndominiums, carports and commercial buildings, see our steel construction services. Call or text (254) 931-6044 to talk through your building.

Pre-engineered metal buildings are steel systems whose frames, secondary framing and panels are designed together for your size and site loads, then bolted together on your pad. The pad and the frame come from the same people here, so the anchor bolts land where the drawings say.

Quinn Construction is a family-owned metal building construction company based on State Highway 36 near Moody, with more than 20 years in construction. We do the dirt work too, so the pad and the frame come from one crew. Call or text Chris at (254) 931-6044 to talk through your building.

When to call

Signs it's time for a metal shop or barn

Equipment stored outside loses value every season: sun cooks hydraulic hoses, and rain soaks round bales from the bottom up. Steel orders carry lead times, so a building you want by spring gets ordered well before then.

  • Hay is stacked outside or under a tarp, and the bottom bales are rotting
  • Tractors, trailers or a skid steer sit in the weather year-round
  • Your workshop has outgrown the garage, or you're paying for storage you could have on your own land
  • The old pole barn is leaning, rusted through, or too short for today's equipment
  • You just bought acreage or are retiring to the place and need a base of operations
Inside a new metal building showing red-iron frame, purlins and a clean concrete floor by Quinn ConstructionSteel frame, purlins and girts before sheeting
What's included

What pre-engineered metal building construction involves

Here's what we deliver, from the bolts in the slab to the closures under the ridge cap.

  • Anchor bolts and a slab set to the frame plan

    Every steel package comes with an anchor bolt plan: the bolt pattern, diameter, embedment and concrete strength each column base needs. We build and compact the pad (see land clearing for building), form the slab and set the bolts in templates checked against the plan before the pour. A bolt that misses its mark means drilling, epoxy anchors or a frame that won't sit plumb.

  • Frames sized to the span you need

    Narrow shops can use light-gauge tube frames, while wider buildings use built-up or tapered rigid frames that clear-span the full width with no interior posts. We size the width and eave height around your equipment and doors, not a catalog default. Bracing goes in as the frames stand, so the building is square before anything is sheeted.

  • Purlins, girts and metal panels

    Cold-formed purlins run across the roof frames and girts along the walls, and the panels screw to them. Trim, ridge cap and closure strips go on last to keep out birds and blowing rain.

  • Doors, openings and insulated metal buildings

    Roll-up doors, walk doors and windows get framed openings designed into the package, not cut in afterward. For insulated metal buildings, faced insulation goes in with the vapor retarder toward the inside, so the roof doesn't drip condensation on your equipment.

Local ground, local rules

The shop and barn problems we see most in Central Texas

  • A building too short for the equipment

    Eave heights that suit a car and a mower don't clear a cab tractor with a loader. We size the eave around your tallest load and the door it has to clear, with room for the header and opener.

  • Open sides and oversized doors

    Equipment barns often leave a sidewall open, and a wide opening across a sidewall usually needs extra engineering, not a catalog package, so we plan it into the drawings from the start.

  • Catalog wind speeds on an open pasture

    Stock drawings often assume a default design wind speed. A barn on an exposed hilltop should have its loads checked for its address before the order, which is what site-specific drawings are for.

  • Blackland clay under the slab

    East of I-35, black clay swells when wet and shrinks in drought, and a slab on poorly compacted fill will crack. Building the pad ourselves, plus a gravel driveway the steel trailer can use, prevents most of it.

Real Quinn jobs

Metal Buildings photos from our jobs

See the full project gallery

How it works

How a Quinn shop or barn gets built

Five steps, from measuring the equipment to running every door.

  1. Measure the equipment and walk the site with Chris

    Chris meets you on the property to look at where the building will sit, how trucks get in, which way water drains and where power comes from. Bring the measurements of your tallest and widest equipment and how you'll use the space. Those numbers set the width, eave height and doors.

  2. Size the package and get a written estimate

    We spec the frame, bay spacing, panels, doors and insulation, then send a written estimate with site work, slab, steel and erection on separate lines. Once you approve, we order the steel and pull any permit your city or county needs.

  3. Build the pad and set the anchor bolts

    The crew clears the footprint, strips topsoil, and builds and compacts the pad, with a Texas811 call two working days before digging footings or piers. Bolts go in on templates, checked against the anchor bolt plan before the pour.

  4. Stand the frames, then purlins, girts and sheeting

    Frames are stood, plumbed and braced one bay at a time. Purlins and girts follow, then insulation and panels, with the blanket kept taut as each panel is screwed down. Doors, trim and closures finish the dry-in, and we keep you posted on progress and rain days.

  5. Cleanup and a walkthrough with you

    We pick up offcuts and scrap and grade the ground around the building. Then you walk the building with us, run every door and point out anything to fix. You get an itemized invoice that matches the approved estimate plus any change orders you signed.

Ready to start your metal buildings project?

Free estimates. Chris Quinn answers the phone himself.

Pricing

How much does metal building construction cost in Central Texas?

Shops and barns are quoted from a site visit and a written, line-item estimate, because the same footprint can be an open hay barn or an insulated, slabbed shop with three doors. That's why a single cost-per-square-foot number can mislead. Your estimate shows site work, slab, steel and erection on separate lines.

Every estimate is free, and we explain exactly what you're paying for. Request yours or call or text (254) 931-6044.

What changes the price

What moves a metal buildings quote

  • Width, eave height and frame type (tube frames versus rigid frames on wide clear spans)
  • Open versus fully enclosed sides, and any oversized door that needs extra engineering
  • Number and size of roll-up doors, walk doors and windows
  • Insulation: none, faced blanket or spray foam
  • Floor: full slab, slab with an open apron, or pier footings for an open barn
Get my free written estimate
Why Quinn

Why owners choose Quinn over kit sellers and other local metal building builders

A kit seller ships you steel. We hand you a finished building on a pad we built.

  • The pad and the frame come from one crew

    The people who build the pad also set the bolts and stand the frames. As one reviewer put it, Chris does the dirt work and clearing, and his team welded up the building.

  • Sized around what you'll park inside

    We ask for the height of your tallest equipment and the width of your widest trailer before we talk square footage, so you don't find out on delivery day that the loader won't clear the header.

  • We come back when something goes wrong

    When one owner damaged his shop months after we finished it, we came back and made it better than new. It's part of how we earned 5.0 stars on Google.

  • 20+ years in construction, family-owned

    Chris Quinn runs every build. Texas has no state general contractor license, so ask any builder for proof of insurance. We're fully insured.

Where we work

Metal Buildings across Central Texas

Serving all of Central Texas and surrounding areas, and we'll travel anywhere in Texas for large projects. From the yard on State Highway 36 near Moody, SH 36 runs northwest to Gatesville and southeast to Temple, FM 107 meets I-35 at Bruceville-Eddy, and SH 317 links McGregor, Moody and Belton. Need a hay barn outside McGregor, a shop in Troy, or an equipment barn on a Coryell County ranch? West of I-35 we often build on limestone, and to the east on black clay, so each site gets the foundation its ground calls for.

MCLENNANBELLFALLSCORYELLMILAMBOSQUEWILLIAMSONLIMESTONEHILLLAMPASASHAMILTONBURNETTRAVISI-35SH 3625 mi45 mi60 miMoodyBruceville-EddyTroyMcGregorWacoTempleBeltonKilleenHarker HeightsSaladoGatesvilleHewittLorenaMarlinRosebudJarrellGeorgetownRound RockHuttoLiberty HillBurnetAustin
Practical answers

Metal Buildings questions, answered

The terms overlap. Prefabricated metal buildings are any steel buildings made in a plant and assembled on site, from a small tube-frame kit to a warehouse. Pre-engineered metal buildings are the subset designed as a matched system, with frames, purlins, girts and panels engineered together for a specific size and set of loads. For a shop or barn you'll keep for decades, we recommend the engineered system.

Still have a question? Call or text Chris at (254) 931-6044, or read the general FAQs.

Free estimate

Free metal buildings estimate

Tell us where the property is and what you want done. Chris walks it with you and gives you a written quote.

Request my free estimate (254) 931-6044
  • No obligation, no pressure
  • Chris walks the property himself
  • Written quote, line by line
Real Google reviews

What clients say about our metal buildings

“Our inspector noted several times this is the most well constructed building he has seen from start to finish. Chris and his team worked with us every step of the way… Chris does amazing dirt work and clearing, and his team welded up our building to the highest standards.”
Michelle M.Google review
“We had a metal shop designed and constructed by Chris Quinn. It was a really great experience--all the way from the initial contact through completion. The communication was excellent. The quality of work appears to be great. We recommend and will use Quinn Construction again.”
Judith S.Google review
“Chris and team recently finished a shop for us, and we are very pleased with it. I did something stupid and damaged the building a couple months later but Chris and the guys fixed it up better than new. If you appreciate someone who will look you in the eye and tell you straight and carry through with his word, and do top quality work, I highly recommend giving Chris a call!”
David B.Google review
Serving all of Central Texas and surrounding areas.

Let's get your equipment under a steel roof

Tell us what you need to park, store or build inside. Chris will walk the site with you and write up an estimate from the pad to the last door.

Call or text Chris(254) 931-6044
  • Free, written estimates
  • Licensed and fully insured
  • Family-owned, 20+ years in the trade
Three-bay tan metal garage with brown roll-up doors built by Quinn Construction on a Central Texas property