“We had Chris come out to mulch a little over an acre, and he did a fantastic job. Was very responsive and got the job done quickly for a great price. Will for sure use them again, as well as recommend them to anyone.”Patrick C.Google review

Take your land back without a burn pile or a dump trailer
Cedar taking over the pasture? Can't walk your own fence line anymore? We grind brush and trees into mulch right where they stand, match the machine to your acreage, and leave your oaks standing.
- star rating on Google
- Free estimates
- Licensed and insured
- Family-owned · Moody, TX
The short answer
Forestry mulching grinds standing brush, cedar and small trees into a layer of mulch in a single pass, with nothing to burn or haul. Quinn Construction runs skid steer and tracked mulchers out of our yard near Moody, TX, sizing the machine to your acreage, and we've done everything from half-acre brush jobs to a 1,000-acre commercial project. Call or text (254) 931-6044 for a free walk-through.
Forestry mulching is the fastest way to take overgrown Central Texas land back without a dozer, a burn permit or a line of dump trailers. Quinn Construction runs more than one mulcher, so we can match the machine to your acreage instead of forcing one size onto every job: a Cat skid steer with a mulching head works tight lots, yards and fence lines, and our CMI tracked mulching tractor handles cedar thickets, heavier timber and big acreage.
As a family-owned Central Texas land development company with more than 20 years in the business, we've done everything from half-acre brush jobs to a 1,000-acre commercial project. Mulching land clearing leaves the ground covered, the soil in place and your oaks standing. Call or text Chris at (254) 931-6044 for a free walk-through.
Pick the forestry mulching page that matches your job
Each one has its own process, pricing factors and answers.
Brush gets thicker and more expensive every season you wait
Ashe juniper and mesquite don't stay small. Every growing season adds stems, crowds out grass, and pushes the job from a skid-steer day into a tracked-mulcher week, and the price follows the size of the trees. Thick cedar also holds fuel close to your house and barns during dry, windy months, when county burn bans make burning it off impossible anyway.
- Cedar (Ashe juniper) is closing in on pasture, and grass is thinning underneath it
- You can't drive, ride or walk your fence line to check it or repair it
- Mesquite and hackberry have filled in a field you used to mow or bale
- Brush is growing within reach of your house, barn or shop
- You just bought acreage and want to see what you own before you plan a homesite
- You want shooting lanes, trails or a feeder road through the back of the property
Our tracked mulcher cutting a lane through cedarWhat our forestry mulching services include
Forestry mulching uses a rotating drum head on a heavy carrier to cut standing trees and brush and grind them into a layer of mulch on the ground, in a single pass. Here is what that looks like on a Quinn job.
The right machine for your acreage
We pick the carrier during your walk-through. The skid steer mulcher suits small lots, yards and fence lines; the tracked mulching tractor handles larger trees and bigger acreage. Production always depends on how thick the brush is, and your written quote names the machine and the days we expect.
Selective clearing around the trees you keep
Most landowners want the cedar gone and the live oaks, post oaks and pecans left standing. We mark keepers with you before the machine starts, and the operator works up to the drip line without skinning bark, because a fresh oak wound invites oak wilt. You choose the scope: full clearing, an understory clean-out, or just a fence line and a few lanes.
Mulch left where it falls
No stacking, burning or hauling. The ground wood stays on the surface as a mulch layer that shades bare soil, slows runoff on slopes and breaks down over time. Nothing leaves the site, so there are no burn-ban delays or dump fees.
Hazard check and a clean finish
Old T-posts, barbed wire buried in cedar and limestone ledges are common here, and they damage knives and throw debris, so we look for them before we cut. At the end we walk the cleared area with you and touch up anything you want lower or cleaner.
The brush problems we see most on Central Texas land
Cedar that takes over overgrazed pasture
Across the limestone country west of I-35, Ashe juniper has spread into land that was once open grass and oak savanna. The good news: Ashe juniper doesn't resprout from the stump, so once it's mulched near the ground, that tree is gone for good.
Mesquite and redberry juniper that come back
Unlike Ashe juniper, mesquite resprouts from the base after it's cut. Plan on follow-up control, or pair mulching with grubbing where you need the roots out, which we quote as land clearing.
Oaks wounded during the wrong season
Texas A&M Forest Service advises against wounding oaks from February through June and recommends painting any fresh oak wound right away. During those months we keep our distance from keeper oaks and paint any nick before we move on.
Black clay that turns to mud after a rain
Blackland soils east of I-35 hold water. Wide tracks spread the machine's weight, but we still schedule around saturated ground so we don't rut your pasture.
Forestry Mulching, before and after
Drag the handle to compare the same property before and after our crew.

BeforeAfter
BeforeAfter





How our forestry mulching works
Five steps, from the first walk to the final touch-up.
Walk the land with Chris
Chris meets you on the property to look at brush type, tree size, slope, rock and access. You'll mark the trees you're keeping and the areas to clear, so the quote matches the job you actually want.
Get a written quote
You get a written quote naming the machine, the scope and the number of days we expect the job to take, with any travel written down up front.
Mark hazards and set up
On day one the crew confirms property lines, flags keeper trees, and looks for buried wire, T-posts, culverts, well heads and septic lids. Anything hidden in the brush can damage the head or throw debris, so we find it first.
Mulch in one pass
The operator works the property in passes, cutting standing cedar, mesquite and brush and grinding it into mulch in place, working up to your keeper trees and stopping short of fences, structures and water lines.
Final walkthrough and touch-up
Before we load the machine, we walk the cleared ground with you and touch up anything you want lower or wider while the mulcher is still on site. You're left with open ground covered in a mulch layer and no burn piles.
Free estimates. Chris Quinn answers the phone himself.
How much does forestry mulching cost in Central Texas?
We price forestry mulching from the walk-through, based on the machine your land needs and the days we expect it to take. Flat per-acre quotes have to pad for the thickest corner of the property; pricing the actual job means you pay for the work your land needs.
Every estimate is free, and we explain exactly what you're paying for. Request yours or call or text (254) 931-6044.
What moves a forestry mulching quote
- How dense the brush is: scattered cedar mulches several times faster than a solid thicket
- The largest trunk diameter that has to come down
- Species: cedar grinds fast, while hardwoods and dead mesquite are slower
- Slope, limestone ledges, and buried wire or fencing
- Selective work around keeper trees, which is slower than full clearing
- Travel distance for large or remote properties
Why Central Texas landowners choose Quinn for mulching
Plenty of forestry mulching companies own one machine and quote every job around it. We don't.
Machines matched to your land
A skid steer mulcher for lots and fence lines, a tracked mulching tractor for thickets and acreage. Small lots don't pay for a big machine, and 40 acres of cedar doesn't drag on with a small one.
The owner walks your property
Chris Quinn handles the walk-through himself and often runs the mulcher, as our reviews mention. You'll talk with the person who prices the job and the person who does it.
A written quote you can plan around
Your estimate names the machine, the scope and the days we expect, so there's no per-acre guessing on brush nobody has measured yet.
Licensed and insured
Texas doesn't license land clearing contractors at the state level, so insurance is the credential to ask for. We carry it, and we put safety first on every site.
One crew for the whole property

Land clearing for a homesite ›
Mulching leaves roots in the ground, so the spot for a house, barndominium or shop has to be grubbed, stripped and leveled.

A gravel driveway to reach it ›
Cleared land needs a way in. We cut, base and compact driveways that handle trucks and trailers after a Central Texas rain.

A barndominium or shop built on it ›
We build what goes on the land too: metal shops, barns and barndominiums, with the same crew from clearing through dry-in.
Forestry Mulching across Central Texas
Serving all of Central Texas and surrounding areas, and we'll travel for large projects. From our yard on State Highway 36 near Moody, Temple is a short drive southeast and Gatesville northwest, FM 107 carries on to I-35 at Bruceville-Eddy, and SH 317 runs north to McGregor and south into Belton. Searching for forestry mulching in Waco, cedar clearing near Gatesville, or mulching around Temple and Belton? The country around Belton Lake, Mother Neff State Park and Fort Hood is cedar and limestone; east toward Troy and Bruceville-Eddy it turns to black clay. We plan each job around which ground you have.
- Moody
- Bruceville-Eddy
- Troy
- McGregor
- Waco
- Temple
- Belton
- Killeen
- Harker Heights
- Salado
- Gatesville
- Hewitt
- Lorena
- Marlin
- Rosebud
- Jarrell
- Georgetown
- Round Rock
- Hutto
- Liberty Hill
- Burnet
- Austin
Forestry Mulching questions, answered
We price the job, not a flat per-acre number, because thick cedar and big trees slow any machine. The walk-through gets you a written quote naming the machine and the days we expect for your property. Estimates are free.
Still have a question? Call or text Chris at (254) 931-6044, or read the general FAQs.
Free forestry mulching estimate
Tell us where the property is and what you want done. Chris walks it with you and gives you a written quote.
Request my free estimate (254) 931-6044- No obligation, no pressure
- Chris walks the property himself
- Written quote, line by line
“These Guys are great we had them come out and do some land clearing and tear an old building down. They started immediately and had it done in very quickly. Chris is a great guy and did all the clearing himself. I have seen a lot of his work and he makes sure it's done with perfection.”Dj S.Google review
“Excellent service. Great communication and very competitive pricing. I called and discussed my project and within 5 days it was completed. Could not be happier.”Kevin K.Google review
Let's open up your land
Tell us how many acres you have and what's growing on them. Chris will walk the property, pick the right machine and give you a written quote.
Call or text Chris(254) 931-6044- Free, written estimates
- Licensed and fully insured
- Family-owned, 20+ years in the trade


